Page 5
ES-SUB-EVO-8-10-12 Owner’s Manual
© 2013 Episode
5.
Making System Connections
5.1. Wiring Recommendations
• For line-level connections, use high-quality, low impedance RCA cables with adequate shielding and high-quality
connectors.
• Use two-conductor loudspeaker cable for high level connections that is appropriate for the installation environment
and wire length.
5.2. Audio Connections
To provide signal to the EVO subwoofer, a connection must be made from the audio source or speaker wiring. Most
home theater AV receivers and sources supply an “LFE” output for subwoofers that should be used if available. Stereo
line or speaker-level inputs from sources or speaker wiring may also be used.
CAUTION! DO NOT connect to both the line and speaker level connections at the same time. Use only line-level
connections, or only speaker-level connections.
5.2.1.
Line-Level RCA Connections
Optional Loop out to more subwoofers
Use same connection type as input (LFE or
L/R)
AV Receiver/Processor
RCA Outputs
LS
RS
SUB
CEN
L
R
LR
RR
LF CF RF
Speaker Outputs
Left & Right
Preamp Out
LFE/
SUB Out
OR
WARNING! Do not connect to both the low-level RCA and high-level speaker
connections. Use only one connection method.
Summary of Contents for ES-SUB-EVO10-200
Page 12: ...131106 1424 ...
