Page 10
ES-SUB-EVO-8-10-12 Owner’s Manual
1. STATUS LED
Red- Subwoofer is in standby mode, or power mode switch is set to OFF. AC power is present.
Blue- Subwoofer power mode switch is set to ON, or is set to AUTO and signal is being received.
2.
Power Mode Switch
3 way toggle switch for setting power mode to OFF, AUTO, or ON.
3.
Volume Knob
Adjust subwoofer volume.
4.
Phase Knob
Set the phase of the subwoofer in relation to the listening area. Continuously variable from 0 to 180°.
5.
Crossover Knob
Adjust the crossover frequency (limits the highest frequency the subwoofer will play).
*Note: Set the crossover knob to “LFE” if the LFE input is used.
6. LOW LEVEL Inputs & Outputs (RCA)
For left/right or LFE connections from audio source, and outputs for connecting other equipment. To connect LFE, use
the L (left) channel connections.
7.
HIGH LEVEL Inputs & Outputs (Speaker Wire Binding Post)
Connect left/right connections from speaker cable runs, and loop to other speakers.
8.
Voltage Selector Switch
Select the input voltage. Default: 100-120V.
9.
Master Power Switch
Rocker switch to turn power off to the subwoofer. Power LED will be off if switch is off but power is present.
10. Power Cord Inlet
Connect the included cord for providing power.
11.
Fuse Holder (ES-SUB-EVO-10 and 12 Only)
Master Power fuse. See Specifications for the correct size and rating for the model in use. Includes spare fuse inside
holder.
8
7
9
10
11
6
5
3
2
1
4
9.2.
ES-SUB-EVO10-200 & ES-SUB-EVO12-300
Summary of Contents for ES-SUB-EVO10-200
Page 12: ...131106 1424 ...
