epiphan KVM2Ethernet, User Manual

Page: 94 / 188

5. Windows Network Discovery Utility List of Devices
Page 94 VGA2Ethernet
List of Devices
The left pane of the Network Discovery Utility shows the
Epiphan devices that have been found on the network and are
available to DirectShow applications installed on the video
capture workstation.
For each device, the list displays a thumbnail of the current
captured image (if appropriate), the name, serial number, IP
address and device status of the Epiphan device.
The names of the VGA2Ethernet devices found on your network
appear in the DirectShow compatible applications that you can
use to record captured images. You can change these names using
the Network Discovery Utility.
You can use the buttons at the bottom of the list to add or remove
Epiphan devices from the list and to search the network for new
Epiphan devices. For more details about this list, see “List of
Devices” on page 94 .
You can do the following with the buttons at the bottom of the
list:
Add
Add a new Epiphan device to the list by adding a
Name for the device and an IP address and selecting
Add . As you enter the IP address the Network
Discovery Utility searches for an Epiphan device that
matches the IP address. If a device is found the status
indicator changes to green. If a device is not found
the status icon remains red. You can add different IP
addresses until you add one that matches a device.
Remove
Select an Epiphan device from the list and select
Remove to delete the device from the list.
Search
Select Search to search your network for new
Epiphan devices. If an Epiphan device is found that
is not on the list it is added.