Standalone VGA Grid User Guide
Recorded files
Recorded files
Recordings you make of channels or with recorders are stored on the system's internal hard drive. The
Standalone VGA Grid has a finite amount of available hard drive storage space. Though it is enough space to
hold a lot of recordings, it will eventually run out of space if recordings are added but never removed. When
this happens, the system deletes the oldest recorded files to make room for new recordings.
You can use a variety of methods to automatically transfer files from the system to local network storage.
Alternatively you can manually select individual recordings to transfer or delete.
This section discusses the following manual file management topics.
l
l
Download recorded files manually
l
Extract tracks from a recording
l
l
Delete recorded files manually
For information on automatic file transfers, see
.
View list of recorded files
Recordings for Standalone VGA Grid are stored for each channel and each recorder separately. To view all the
recordings stored, follow the procedures below for all channels and all recorders you have configured.
To view the recordings for a channels or recorders:
1. Connect to the admin interface using your preferred connection mechanism. See
2. Login as admin or operator.
3. To view files recorded for a channel:
a. Select a channel from the Channels section; the channel menu expands.
b. Select the
Recording
link for your channel; the Recording page appears.
4. To view files recoded for a recorder:
a. Select the recorder from the Recorders section; the recorder page appears.
5. If there are no files:
a. A message indicates there are no recorded files (for this channel).
215
