Epilog Laser FiberMark Fusion 13000, Owner'S Manual

Page: 170 / 202

Section 14: Specifications
156
Other Computer Hardware
Recommendations
Scanner
A flatbed scanner is another indispensable tool for generating custom artwork.
Almost any flatbed scanner today is adequate for scanning artwork. Hand held
“mouse” scanners do not provide the necessary accuracy and should be avoided.
Heavy Duty Surge Protector
The need for a surge protector varies greatly throughout the world. If the laser is
operated anywhere that the electrical power is subject to spikes, outages, lighting,
fluctuations, etc. a surge protector should be used on both the laser and the computer.
A surge protector is a very, very cheap insurance policy against catastrophic electrical
damage. A surge protector is designed to be an inexpensive device that absorbs any
electrical problems before they can damage the expensive equipment (computer and
laser) they are protecting.
About The Laser
Your Epilog CO2 laser system uses the latest in waveguide laser technology to
provide a powerful tool that is simple and safe to setup and operate. The Epilog laser
can mark, engrave, and cut a variety of non-metallic materials.
The CO2 laser beam itself is invisible. The beam is about half the diameter of a #2
pencil. Unfocused, it will just make an ugly burn, leaving lots of charred material
behind. The focus lens gives the beam an hourglass shape. At the center point the
energy density is concentrated, allowing the very precise and clean material removal
that is characteristic of laser engraving. The center of the hourglass is the “focal
point”.
The laser beam path is completely enclosed within the cabinet. Please do not
disassemble or modify any of the covers or windows on the machine. If at any time
you notice that the laser operates with a door or window open, please contact Epilog
technical support immediately.