3
CHARGING YOUR BOTTLE OPENER
Unit requires 12 hour charge before first use. To charge:
•
Plug DC connector into unit, then plug AC end into electrical outlet.
•
Place Bottle Opener into charging base properly to ensure charge.
•
Charging base will start working automatically
•
When the charging process is complete, the blue indicator light will glow
OPENING A SEALED BOTTLE
•
Remove any foil from the bottle by using the magnetized foil cutter included. While holding the
lower half of the bottle firmly, affix the foil cutter to the top of the bottle and twist to remove
foil.
•
Ensure that the bottle remains upright, and then place the bottle opener firmly against the top of
the bottle. Holding the bottle opener at an angle to the bottle may result in improper removal of
cork.
•
Press the lower button to engage the opener. The corkscrew spiral will now turn counter-
clockwise and enter the cork, gradually removing it from the bottle. When the cork has been
fully removed, the Electric Wine Opener will stop.
•
Lift the bottle opener away from the bottle. Press the upper button and the corkscrew spiral will
turn clockwise and release the cork.
•
During periods of inactivity, return the opener to its charging base.
CARE AND MAINTENANCE
•
Always store your Electric Wine Opener in a cool, dry place.
•
Always disconnect before cleaning. To clean, wipe housing with a soft and dry cloth. Do not use
liquid or abrasive cleaning agents.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
LED indicator light does
not work
•
Check if the DC cord is in good condition
•
Check if the electrical outlet is in good condition
•
Check if the plug is connected properly
•
Check if the charging base has been damaged
