1
Macro Edit – Insert Basic commands, Insert Additional Commands & Insert Delay Time (ms):
A.
Insert Basic Commands – on the “Macro Management” page, under “Macro Edit” section, the “Insert Basic Commands” drop down menu
provides basic Windows commands such as copy, past, cut, print, save and etc. to be inserted as lines of command to a macro.
Click on the double-arrow icon to the left of the drop down menu to insert.
B.
Insert Additional Commands – on the “Macro Management” page, under “Macro Edit” section, the “Insert Additional Commands” drop
down menu provide you with additional Windows commands such as switch windows, close windows, zoom in, zoom out and etc. to be
inserted as lines of command to a macro. Click on the double-arrow icon to the left of the drop down menu to insert.
C.
Insert Delay Time (ms) – on “Macro Management” page, under “Macro Edit” section, the “Insert Delay Time (ms)” allows you to enter a
desired delay time to be inserted between lines of command one at a time. Click on the double-arrow icon to the left of the drop down
menu to insert.
A
B
C
Caution: You must conduct macro setup under 6-Key Rollover mode. Please refer to “N-Key Rollover & 6-Key Rollover Mode Change“ on P9.
www.epicgear.com / P16
