Macro Setup
New Macro Setup:
Step 1
– Go to the “Macro Management” page.
Step 2
– Go to the “Macro Management” section; click on “New” and enter a filename for the new macro in the popup; click “OK” when
you have typed in the desired filename.
Step 3
– Under the “Macro Setting” section; click on the “Ignore Delay Time” for no delay between commands; click “Insert Default Delay”
and type in the desired milliseconds of delay time between commands.
Step 4
– When you are ready to record, under “Macro Management” section click on the recording button (with a circle imprint) to start the
recording process. The circle on the recording button will be flashing red when recording is in progress.
Step 5
– When you have completed recording, under “Macro Management” section, click on the stop button (with a square imprint) to stop
the recording process. The circle on the recording button will stop flashing when the recording is stopped.
www.epicgear.com / P14
Caution: You must conduct macro setup under 6-Key Rollover mode. Please refer to “N-Key Rollover & 6-Key Rollover Mode Change“ on P9.
Step 1
Step 2
Step 3
Step 4
Step 5
