11
12
12. Apply a small amount of grease to the right
Crank Arm (20).
Orient a Roller Arm (45) so that the Roller (51)
is in the position shown.
Slide the Roller Arm (45) onto the right Crank
Arm (20) while setting the Roller (51) on the
Ramp (3).
Attach the Roller Arm (45) with an M8 x 19mm
Screw (82), an Axle Cover (53), and an M8 x
25mm Washer (98);
to avoid breaking the
Axle Cover, do not overtighten the Screw.
Repeat this step on the other side of the
elliptical.
45
51
82
53
98
3
20
Grease
13
13. Identify the Right Pedal Arm (58), which is
marked with a “Right” sticker, and orient it as
shown.
Then, orient a Pedal (49) as shown.
Attach the Pedal (49) to the Right Pedal Arm
(58) with six #10 x 13mm Screws (59) and six
M6 Split Washers (111).
Attach the other Pedal (not shown) to the
Left Pedal Arm (not shown) in the same way.
49
58
111
111
59
59
59
All manuals and user guides at all-guides.com
all-guides.com
