Epic Fitness A42t Sport Treadmill User Manual Download

Page: 30 / 40

Most treadmill problems can be solved by follow-

ing the simple steps below. Find the symptom that

applies, and follow the steps listed. If further assis-

tance is needed, see the front cover of this manual.

SYMPTOM: The power does not turn on

a. Make sure that the power cord is plugged into a

surge suppressor and that the surge suppressor

is plugged into a properly grounded outlet (see

page 14). Use only a surge suppressor that meets

all of the specifications described on page 14.

IMPORTANT: The treadmill is not compatible

with GFCI-equipped outlets and may not be

compatible with AFCI-equipped outlets.

b. After the power cord has been plugged in, make

sure that the key is inserted into the console.

c. Check the power switch located on the treadmill

frame near the power cord. If the switch protrudes

as shown, the switch has tripped. To reset the

power switch, wait for five minutes and then press

the switch back in.

SYMPTOM: The power turns off during use

a. Check the power switch (see the drawing above).

If the switch has tripped, wait for five minutes and

then press the switch back in.

b. Make sure that the power cord is plugged in. If the

power cord is plugged in, unplug it, wait for five

minutes, and then plug it back in.

c. Remove the key from the console, and then

reinsert it.

d. If the treadmill still will not run, please see the front

cover of this manual.

SYMPTOM: The console screen remains lit when

you remove the key from the console

a. The console features a demo mode, designed to

be used if the treadmill is displayed in a store. If

the screen shows a demo presentation when you

remove the key, the demo mode is turned on. To

turn off the demo mode, hold down the Stop button

for a few seconds. If the screen is still lit, see step 7

on page 25 to turn off the demo mode.

SYMPTOM: The incline of the treadmill does not

change correctly

a. Calibrate the incline system (see step 4 on

page 26).

SYMPTOM: The iFit mode does not function

correctly

a. If the iFit mode is not functioning correctly, make

sure that the treadmill has the most current firm-

ware available (see step 3 on page 26).

SYMPTOM: The treadmill will not connect to the

wireless network

a. Make sure that the wireless settings on your con-

sole are correct (see step 4 on page 27).

b. Make sure that the settings for your wireless net-

work are correct.

c. If you still have questions, see the front cover of

this manual.

TROUBLESHOOTING

Reset

Tripped

Summary of Contents for A42t Sport Treadmill









































Search results

Summary of Contents for A42t Sport Treadmill

Reviews:

Related manuals for A42t Sport Treadmill

Brands by name

Popular brands

Epic Fitness A42t Sport Treadmill, User Manual

Search results

Summary of Contents for A42t Sport Treadmill

Reviews:

Related manuals for A42t Sport Treadmill

Brands by name

Popular brands