Epic Fitness A42t Sport Treadmill User Manual Download

Page: 29 / 40

HOW TO FOLD THE TREADMILL

To avoid damaging the treadmill, adjust the incline

to the Storage Position (zero percent) before

you fold the treadmill. Then, remove the key and

unplug the power cord. CAUTION: You must be

able to safely lift 45 lbs. (20 kg) to raise, lower, or

move the treadmill.

1. Hold the metal frame firmly in the location shown

by the arrow below. CAUTION: Do not hold the

frame by the plastic foot rails. Bend your legs

and keep your back straight.

2. Raise the frame until the storage latch locks in the

storage position. CAUTION: Make sure that the

latch handle locks.

To protect the floor or carpet, place a mat under the

treadmill. Keep the treadmill out of direct sunlight.

Do not leave the treadmill in the storage position in

temperatures above 85° F (30° C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, fold it as described at the

left. CAUTION: Make sure that the latch handle is

locked in the storage position. Moving the treadmill

may require two people.

1. Hold the frame and one of the handrails, and place

one foot against a wheel.

2. Pull back on the handrail until the treadmill will roll

on the wheels, and carefully move it to the desired

location. CAUTION: Do not move the treadmill

without tipping it back, do not pull on the frame,

and do not move the treadmill over an uneven

surface.

3. Place one foot against a wheel, and carefully lower

the treadmill.

HOW TO LOWER THE TREADMILL FOR USE

See drawing 2. Hold the upper end of the tread-

mill frame with one hand. Press the latch handle

with your other hand; if necessary, push the frame

forward slightly. Pivot the frame downward a few

inches, and release the latch handle.

2. See drawing 1 at the left. Hold the metal frame

firmly with both hands, and lower it to the floor.

CAUTION: Do not hold the frame by the plastic

foot rails, and do not drop the frame. Bend your

legs and keep your back straight.

HOW TO FOLD AND MOVE THE TREADMILL

Handrail

Frame

Wheel

Frame

Latch

Handle

Frame

Summary of Contents for A42t Sport Treadmill









































Search results

Summary of Contents for A42t Sport Treadmill

Reviews:

Related manuals for A42t Sport Treadmill

Brands by name

Popular brands

Epic Fitness A42t Sport Treadmill, User Manual

Search results

Summary of Contents for A42t Sport Treadmill

Reviews:

Related manuals for A42t Sport Treadmill

Brands by name

Popular brands