23
enter the battery-type interface.
2) Press the
button to select the battery type, such
as select the battery type as F04. And then, press the
button to confirm and go back to the battery
voltage interface automatically.
3) On the battery voltage interface, long-press the
button to enter the battery-type interface again.
4) Press the
button to select the battery type as
“USE.”
parameters
setting interface, and long-press the
button to enter the
battery-type interface.
2) Press the
or
button to select the battery type, such as
select the battery type as F04. And then press the
button to
confirm. Continue to press the
button twice or wait for 10S of
no-operation to automatically go back to the battery parameters
setting interface.
3) Long-press the
button to enter the battery-type interface
again on the battery parameters setting interface.
4) Press the
or
button to select the battery type “USE.”
Step2: Set the battery parameters on the local device.
Under the "USE" interface, the battery parameters that can be local set are shown in the table below:
Parameters
Default
Range
XDS1 module operation steps
XDS2 module operation steps
System
voltage level
(SYS)
12VDC
12/24/36
/48VDC
1) Under the "USE" battery type, press the
button to enter the “SYS” interface.
2) Press the
button again to display the
current “SYS” value.
3) Press the
button to modify the parameter.
1) Under the "USE" battery type, press the
button
to enter the “SYS” interface.
2) Press the
button again to display the current
“SYS” value.
