22
4 Parameters Setting
4.1 Battery parameters
4.1.1 Supported battery types
1
Battery
Sealed(default)
Gel
Flooded
2
Lithium
battery
LiFePO4(4S/8S/15S/16S)
Li(NiCoMn)O2 (3S/6S/7S/13S/14S)
3
User
Note: If the controller supports 48V system voltage, the battery type will display LiFePO4 F15/F16 and Li(NiCoMn)O2 N13/N14.
4.1.2 Local setting
WARNING
When the default battery type is selected, the battery voltage parameters cannot be modified. To change these parameters, select the
"USE" type.
Step1
:
Enter the “USE” battery type.
Detailed
operations of entering the “USE” battery type are shown in the following table.
Content
XDS1 module operation steps
XDS2 module operation steps
Enter the “USE”
battery type
1) Press the
button to jump to the battery
voltage interface, and long-press the
button to
1) Press the
button to browse the battery parameters on the
initial interface. Press the
button to enter the battery