Epever IP1500-12-Plus(T), User Manual, Page: 20 / 36

17
IMPORTANT: The inverter shall be installed in a place with
sufficient airflow through the dissipation pad of the inverter and a
minimum clearance of 150mm from the upper and lower edges of the
inverter to ensure natural thermal convection.
CAUTION: The inverter shall be cooling through case if installed
in a closed box.
IP1500-12-Plus/IP2000-**-Plus
IP3000-12-Plus
Step3
：
Wiring
WARNING
：
The AC equipment shall be determined by the
continuous output power of the inverter, but the surge power must be
lower than the instantaneous surge power of the inverter.
CAUTION: The switch of the inverter isOFF before wiring.
CAUTION: DO NOT close the circuit breaker or fuse and make
sure that the leads of
“+” and “-” poles are correctly connected while
wiring the inverter.