Epever IP1000-11, User Manual

Page: 9 / 24

6
Step 3 : Use the cable no less than 4mm
2
to connect the inverter's grounding terminal to the
ground.
Step 4: Connect the plug of AC load to the inverter AC outlet
Step 5 : Switch on the input breaker or the fuse between the inverter and battery; turn on
the power switch to start the inverter. If the green indicator is on solid, turn on the
loads one by one. Check the operation state of the inverter and loads.
Step 6 : If there are different types of loads, the loads with higher startup current should be
turned on firstly, such as television. After the loads work stably, turn on the loads
with a lower startup current, such as an incandescent lamp.
Step 7 : If the Fault indicator is red and the buzzer alarms when turning on the devices,
please switch off the loads and inverter immediately.
Note: When using a USB port for charging, it is suggested to charge the
power bank first and then use the power bank to charge mobile phones.