REV. 09/2020
21
B
2.3.10
Operating the truck without its own drive system
If the truck has to be moved after a failure
has rendered it immobile, proceed as
follows:
Set the emergency stop switch “OFF”.
Set the key switch “OFF” and remove the
key.
Prevent the truck from rolling away.
Remove the cover.
Screw in two screws(1), M4*35mm)until the
truck
can be moved (no braking action).
Tighten two screws(1), the truck can be
moved (no braking action) for
RPL201/
RPL201H/RPL202.
After setting down the truck at the
destination, un
screw two screws(1)
.
Braking action is restored.
•
•
•
This operating mode is not permitted
when negotiating inclines and gradients.
WARNING
RPL201/RPL201H/RPL202
WPL201/HPL152/EPL151
Summary of Contents for EPL151
