REV. 08/2019
1
H
H Troubleshooting
If the fault cannot be rectified after carrying out the remedial procedure, notify the Manfacture's se-
vice department, as any further troubleshooting can only be performed by specially trained and
qualified service personnel.
Fault
Probable Cause
Action
Truck does
not start.
–Battery connector not plugged
in
–Key switch in “0” position
–Incorrect CanCode code
–Battery charge too low
–Faulty fuse
–Truck in charge mode
–Check the battery connector and
connect if necessary.
–Set key switch to “I”
–Check code
–Check battery charge, charge battery
if necessary
–Check fuses.
–Interrupt charging
Load cannot
be lifted
–Charging capacity below 20 /
40%
–Truck not operational
–Hydraulic oil level too
low
–Faulty fuse
–Charging the battery
–Carry out all measures listed under
“Truck does not start”
–Check the hydraulic oil level
–Check fuses.
