REV. 08/2019
9
E
Pull down on the handle to release the
tension on the safety pin. Carefully remove
the safety pin.
Figure
01307
Connect the both electrical plugs.
Test all the features of the semi-electric pallet
truck before this step. The handle should be
pumped with full strokes to prime and eliminate
air in the system.
The up/down lever should be checked at the
handle’s lowest position for this puts the most
tension on the chain. Once the
pallet truck is adjusted properly and is
performing well, drive in the second cotter pin.
Tie the wire harness with a tie wrap(see arrow 1)
together .
Figure
01308
Figure
01309
Figure
01310
1
