11
Operation
1. Connect the power supply.
Connect the power cord to the inlet and outlet. Turn on the power switch.
2. Setting the fold stops.
2.1 Position the fold stop according to the desired fold type.
Push the half-nut level to loosen and move the fold stop to the demanded position
referring to the color folding instruction on the plates. Loosen your grip and the fold stop
will be locked there by the level.
2.2 Fine adjustment.
Feed on sheet, press TEST button. Rotate the fine adjustment knob to move the fold
stop to the proper position according to the instructions below.
Move the fold stop by half of the distance to be corrected. For example, move the fold
stop by 0.5mm if 1mm of correction is required.
