28
Video/USB Cables
These may appear the same as common video/USB cables. However,
they are actually unique for the X320 and X640 Camera. Do Not
attempt to use other similar cables – they will not operate the camera,
and may cause damage
Operating With Video & External Power
The External connections are located inside the Rear Plug.
AC/DC Power Adapter
Connect the AC/DC Power Adapter to the connector labeled
“Power”, and to AC power (wall outlet). If batteries are installed
and the AC/DC adapter is connected, the camera receives its power
from the AC/DC power adapter. It continues to monitor battery
voltage and will stop operating if the batteries are low
The AC/DC Power Adapter provides power to the camera –
however, it does not recharge batteries installed in the camera.
Video Cable
Connect the Video Cable to the connector labeled “Video”, and to a
Video Monitor or video recorder. When Connecting the Video
Cable, the video continues to be displayed on the internal LCD, so
that the user can monitor what is being recorded or displayed
externally. If the internal display is not being used, the brightness
should be set to minimum to extend battery life.
Power
Pull
To Open
Push
To Close
Power
Video
