26
o
Crosshair turns on the + symbol in the center of the
display.
Apply Changes applies your changes to the camera and saves
them to camera memory so that it uses this configuration every
time the camera is powered up. To save your changes, click on
DO NOT DISCONNECT THE CAMERA FROM
THE COMPUTER OR REMOVE POWER WHILE
DATA IS BEING SAVED BY APPLY CHANGES.
IF THE CAMERA LOSES POWER WHILE DATA
IS BEING SAVED, THE CAMERA MEMORY
MAY BE CORRUPTED.
A message pops up to confirm that you want to save the changes
you have made.
Once the changes have been saved successfully the Status
symbol turns green and it is now safe to disconnect the camera.