The brake is equipped with the swivel caster on the right side.
(1)
Breaking the wheel, press the brake pedal.
(2)
Releasing the brake, lift up the brake pedal.
4.
Daily inspection
Daily inspection is effective to find the malfunction or fault on lift table.Check lift table on the following points
before operation.
(1)
Check for scratch,bending or cracking on the lift table.
(2)
Check if there is any oil leakage from the cylinder.
(3)
Check the vertical creep of the table.
(4)
Check the smooth movement of the wheels.
(5)
Check the function of brake.
(6)
Check if all the bolts and nuts are tightened firmly.
DO NOT use lift table if any malfunction or fault
is found.
CAUTION
5.
Operation Instruction
5-1. How to use the brake
Brake lift table when not moving it in order to
prevent sudden movement.
CAUTION
5-2. lifting the table
WARNINGS
1. DO NOT overload lift table. Stay within its
rated capacity.
2. DO NOT side or end load must be distributed
on at least 80% of table area.
Press the lifting pedal several times until the table reaches the desired position.
The table does not elevate after reaching the highest position even if the lifting pedal is pressed.
The table lowers slightly after reaching the highest position.
5-3. Lowering table
WARNING
DO NOT put foot or hand in scissors mechanism
Pull the lowering lever up and table lowers.
MAXIMUM CAPACITY OF TABLE
NOTE:
The hydraulic cylinder is designed to hold table.
As is the nature of the hydraulic system, table
lowers very slowly over and extended period of
time. Please note the table does not stay at the
same position
indefinitely.
TA 15
150KG
TA 30
300KG
TA 50
500KG
TA 7
0
7
0
0KG
TA 100
1000KG
2
3
5-4. Fold the handles
To fold the handle, push down the lock bar and lay
down the handle.
