Battery
05
06
12V, 120Ah lead-acid storage batteries are used in this series of stackers.
The storage battery shall be placed in the special anti-spilling case which should be fixed with
bolts.
The storage battery cannot be overturned when installing and moving it in case the acid liquor
spills out.
Keep power off when the stacker is not in use.
1
.
Battery power system
When the left two segments of the battery indicator flash, please charge the battery.
Please check the level of battery electrolyte every week, if the electrolyte is not enough, add
some distilled water or electrolyte.
The stacker shall be charged in places properly ventilated and far away from the fire.
If the stacker will be not in use for long time, charge it fully for storage and charge it once every
month.
Do not use the stacker when it is charged.
2
.
Battery charging
Control panel
①
Emergency stop switch
When you press down this switch, it will switch off the power of the stacker, and then if you turn it
clockwise, it will switch on the power.
②
Control handle of pum
This handle controls the lifting and lowering of the forks.
③
Battery indicator
It is a battery indicator with 10 segment color LED bar graph display. When the battery level is
too low, the left two segments of LED bar graph display will flash to give an alarm.
⑤
Charger socket
④
Key switch
When you turn this switch clockwise, it will switch on the power. When you turn this switch
counterclockwise, it will switch off the power. Before leaving the stacker, fully lowered its forks
and take out the key switch.
Emergency stop switch
Pump control handle
Figure 3
Battery indicator
Key switch
Charger socket
S10/15 Series Semi-electric Pallet Stackers
