EOS Vitae Protect+ Compact, Installation And Operating Instruction

Page: 22 / 38

22
EN
First make a rectangular cut-out in the cabin wall
as shown in the Fig. 5.
The wall above the radiator should be hollow
inside to let the hot air rise.
Draw the connection cable from the radiator up
to the ceiling through the duct in the cabin wall.
Pay attention that the cable connection of the
radiator must be oriented downwards.
Then insert the radiator into the prepared wall
aperture and secure it with the mounting screws.
For details and safety gaps please refer to the
illustrations shown in Fig. 4, 6 and 7.
Installation example and gaps:
Flush-mounted installation
Fig. 6
Vertical installation in corners
Fig. 7
!
Device must be rear-ventilated!
!
ATTENTION!
Do not install the IR radiator in direct
heat range of another IR radiator. Risk of
damages due to overheating!
Front view
Fig. 5
Installation example:
do
wn
!
ATTENTION!
Not suitable for horizontal installation
and installation in the cabin ceiling.
Risk of fire due to heat congestion.
90°
164 mm
167 mm
178 mm
45 mm
30 mm
164 mm
167 mm
178 mm
Holzschutz
45 mm
40 mm
15 mm
Mindestabstand
Gerät muss
hinterlüftet sein
Area behind the
radiator must be
well aerated
Protective guard rail if necessary
minimum distance
200
885
167
865
~60
Dimensions in mm
Wall cut-out
with rear ventilation