20
EN
Technical data
SBM-FL 150
SBM-FL 75
Rated voltage:
230 V 1N ~ 50 Hz
Power supply:
3 m mains cable, Schuko type plug
Power consumption:
max. 150 W
max. 75 W
Housing:
Emotec Design, ABS plastic, wall-mounting installation
Operation:
Via a control unit e.g., see compatible control units
Data connection:
EOS Saunabus system
Outputs:
4 channels (terminals for cathode (-) and anode (+) per channel)
Each channel can be configured for fixed voltage or fixed current
Voltage setting range per channel: 0 - 24 V in 0.5V steps
Current setting range per channel: 0 - 3000 mA in 30 mA steps
Output performance:
Sum of all channels max. 150 W
Sum of all channels max. 75 W
Operating temperature:
-10°C to +35°C
Storage temperature::
-20°C to +40°C
Dimensions (HWD):
270 x 285 x 90 mm
270 x 195 x 90 mm
Illuminant:
LEDs with series resistor (by constant voltage) and without series resi-
stor (by constant current)
Important notice:
LED illuminants with a joint anode (+) are not supported and may not be used.
Compatible control units:
• EOS EmoTec series (from Firmware 2.43)
• EOS EmoStyle series (from Firmware 2.43)
• EOS EmoTouch II+ (from Firmware 3.47)
• EOS EmoTouch 3 series
Summary of Contents for SBM-FL150
