EOS Herkules XL S120 Installation And Operating Instructions Manual Download Page 61

Page: 61 / 68

EOS Herkules XL S120 - Installation and Operating Instructions

Maintenance



Removing the heating coil

WARNING! Electric shock may occur if the heating coil is serviced while
the heater is connected to the power supply.
Ensure that the heater has been disconnected from all power supply
lines.

Switch off the heater.

Switch off the fuses to disconnect the heater from the mains supply.

Loosen the connection cable from the connection terminals.

Unscrew the 8 hexagon socket screws on the heating coil.

Remove the heating coil.



Insert the new heating coil.
See



Inserting the heating coil,





Replace the tubular heating element.
See



Replacing the tubular heating elements,





Replacing the tubular heating elements

Remove the heating coil.
See



Removing the heating coil,



Identify the defective tubular heating element by taking measurements.

Pull out the flat plugs belonging to the tubular heating element to be re-
placed.

Summary of Contents for Herkules XL S120





































































Search results

Summary of Contents for Herkules XL S120

Reviews:

Related manuals for Herkules XL S120

Brands by name

Popular brands

EOS Herkules XL S120, Installation And Operating Instructions Manual

Search results

Summary of Contents for Herkules XL S120

Reviews:

Related manuals for Herkules XL S120

Brands by name

Popular brands