7
Connections
Player Setup
1. Connect the power adapter to wall outlet and plug the connector to player’s power jack.
2. Connect ethernet cable from player to any open port on your internet router.
3. Press POWER button to power on player.
Network Configuration
Note: The Streaming Media Player is set to DHCP as a default. If your router is set to DHCP, no
network configuration is necessary. If your router is configured for a static IP address, follow the
instructions below.
To set a static IP address:
1. Press the SELECT knob to enter settings menu.
2. Using the SELECT knob scroll to Network Settings and press knob to select
3. Scroll to Manual Settings and press the SELECT knob to select
4. Scroll to Wired and press the SELECT knob to select
5. Scroll to DHCP Disable and press the SELECT knob to select
6. Use SELECT knob to set the static IP address, subnet mask, gateway address, primary
DNS and secondary DNS. Scroll knob to each correct number and press select to choose.
To switch back to DHCP:
1. Select System Settings
2. Select Network Settings
3. Select Manual Settings
4. Select Wired
5. Select DHCP enable
Registering the Player
In order for your player to be connected to a streaming music service, the player must first
be registered. To register your player go to pro.eoswireless.com/register and follow the
instructions on the page to register.
INTERNET
POWER
LAN
router
cable/dsl
modem
Eos streaming music player
Connect power supply
1
Connect player to open port on router
2
1
2
Player Connection
9
