11
Player Operation
Player Operation
Choosing a station
1. Press the SELECT button to enter the main menu
2. “Stations” will be the selected setting in the menu
3. Press the SELECT button to enter the“Stations” Menu
4. A list of available stations will be displayed
5. Turn the select knob to scroll to the desired station
6. Select the station by pressing the select button
The station will begin to play and the display will return to the default window.
Storing & Recalling Music Stations with Memory Presets
The player has the ability to store & recall up to 10 stations in memory using the memory preset
buttons.
1. To store rgw current station, press and hold the desired memory button.
2. To recall a station press the specific memory preset button that the station was stored to.
3. To store & access stations 6 thru 10 press the shift button and then the desired station
preset button.
Setting the Master Volume
When the optional Wireless Transmitter installed the master volume control adjusts the output
of the wireless transmitter. The master volume can be set by pressing the RADIO or USB/AUX
volume button. When pressed, the volume knob will pop out from its flush position allowing
the user to set the volume. After the volume is set, to prevent volume from being adjusted ac-
cidently, press the knob again to go back to the flush position.
NOTE - Master volume control does not control the level of the line outputs.
Monitor Speaker
The player features a built in monitor speaker to allow you to listen to music at the source.
Press the SOURCE button to cycle though radio - usb/aux - monitor off. The LED next to the
SOURCE button will display the source. Monitor volume can be adjusted with the VOLUME
knob to the left of the SOURCE button. Monitor volume does not effect the master output
volume of the player.
SD Card Backup
A user supplied SD Card loaded with mp3 audio files can be placed in the SD card slot on the
rear of the player. Should the player lose internet connection, music from the SD card will
begin playing within a few seconds. When the internet connection is reestablished, the music
from the streaming player will begin to play automatically.
USB Flash Drive Port - Zone 2
The player features the ability to play mp3 audio files though Zone 2 by placing a USB flash
drive into the port marked USB ZONE 2 on the front side of the player. The primary use for this
function is for the playback of music on-hold to a telephone system. The USB flash drive port
can also be used to play alternate music to Zone 2.
