10
EN
Fig. 6
21 cm
20 cm
Ey
e lev
el
Holes to fasten the
control unit inside
the wall opening.
Fig.5
Recessed installation
1. Cut out a wall section that is at least 3.5 cm
deep according to the dimension in Fig. 5.
Insert the supplied rubber grommets into the
openings at the rear wall of the housing and
insert the connecting cables through these
openings.
Place the control unit into the wall opening and
fasten it with 4 wood screws.
Feed-through for:
Mains cable
Evaporator cable
Lamp
Fan
Feed-through for:
sensor lines
