EN-38
Installation and Operating Instructions - EOS Compact DP/HP
EN
Connecting the lines
4.3
Connecting the sensor cables
WARNING
Risk of electric shock
There is a risk of electric shock when connecting the cables if the
control unit is connected to the power supply.
Ensure that the control unit has no power.
Required tools:
Flathead screwdriver
The front cover must be removed for the following steps. See:
The cable is connected to a plug that can be removed from the circuit
board. This plug should be removed so that the cable can be connected
easily and safely. When the cable is connected, the plug is plugged in again
to the circuit board.
A
Terminal plug for safety temper-
ature limiter
B
Sensor for safety temperature limiter
S T B
Oven Sens.
A
B
