EOS 46.U, Assembly And Operating Instruction, Page: 23 / 39

23
EN
Installation
Technical Data
Voltage: 400 V 3N ~ 50 Hz
Power rating: 6.0; 7,5; 9,0; 12,0 kW depending
on the version
Height: 870
Width: 1120 mm
Depth: 200 mm
Rock store: 15 kg
Leakage current: max. 0.75 mA per kW heating
capacity.
46.U is a sauna heater for use in domestic and
commercial sauna cabins.
The sauna heater is intended for a connection
voltage of 400 V 3N ~ via a sauna controller.
46.U sauna heater is designed for the hidden
installation behind sauna benches as shown in
fi g. 2 / 2a.
Standard delivery includes:
1 sauna heater
1 safety grill, wooden funnel and silicone pipe
4 screws
The minimum height of the sauna cabin must
be 1.90 m on the inside.
When assembling the sauna oven, attention
must be paid to the fact that the vertical dis-
tance between the upper edge of the oven and
the sauna roof must be at least 90 cm, and the
horizontal (lateral) distance between the oven
and the booth wall at least 7cm
The distance between the oven protective grill
and the sauna bench or other combustible
materials must be at least 2 cm from the oven.
The provided safety grill has to be installed
above the oven at the upper edge of the parti-
tion to the rear wall.
Care should be taken, that objects do not acci-
dentally fall onto the heater.
Minimum clearances
safety grill
temperature sensor
Delivery scope
Fig. 1
Fig. 2
* for cabins up to 2 x 2 m
** for bigger cabins
air
intake air
intake
all dimensions in mm
Cover protection
safety grill
Fig. 2a
temp. sensor
Important notice for temperature
sensor & limiter fuse installation
Contradictory to the instruction concerning
the standard position of the sensor of the
sauna control unit, the temperature sensor
with limiter fuse should be mounted as shown
in the diagram Fig 2 and 2a.
Pay attention to the correct size and
position of the air supply vent and duct vent.
730
70
200
190*
390**
200
min. 300
1030
870
170
70
190*
390**
200
min. 300
1030
870
170
220