EOS Australia PTY LTD SRN-1000, Configuration Manual

Page: 34 / 41

SRN 32
EOS Australia PTY LTD
1. [Camera Event] choose whether or not to use a camera event
2. [MD] choose whether or not to use motion detection
[Camera Event] or [MD] is represented by on the bottom left corner of each camera when motion
or event is detected
3. If [MD] is turned on but you don't see on each camera then you must go manually setup the
motion by click the [Camera MD] button
Make sure [Motion Detection] is enabled and the [Detection Area] is setup