10. Install、Replacing the Remote Control Battery
10.1. get the remote control out of the box, as picture (18)
10.2. Open the remote control battery door, as picture (19)
10.3. Put 2 batteries (battery model: AAA1.5 V) into the remote control, pay attention
to the battery is negative direction, as shown in figure (20)
Note:
Processing of waste battery, please follow the local environmental protection regulations, throw
it to the prescribed recovery site.
Please don't put the old and new, mixed type of different batteries. Long-term need not when,
please take out the battery, in order to prevent battery leakage damage the remote controller
When installing the battery, be sure to pay attention to the battery is negative direction.
That the battery is not enough, please replace the battery in time.
For a long time not to use the remote control, please remove the battery, prevent the battery
electrolyte leakage, lead to the remote control fault occurs.
Do not place the remote control in high temperature or humid place.
Do not use any foreign matter falling within the remote control, especially when replace the
battery.
Please reasonable processing the product of old batteries. Batteries contain dangerous
environment of harmful substances, please do not arbitrarily discarded.
1. Abandoned the Robot, must be taken out the battery.
2. When remove the Battery-cell, must turn off the switch.
3. Battery can not be stored in more than 45 degrees of high temperature environment or in the water.
4. Do not allow the exert force on the battery or falling from height.
5. Battery recycling must be conducted.It is forbidden to throw away 、throwa person of the
fire and explosion in case.
6. If the battery leakage, be careful not to let the fluid sticks to the skin or clothing, shall be
immediately after wipe with dry cloth To the recycle bin or specify pits, do not arbitrarily discarded.
7. Rechargeable batteries is forbidden to use.
