4-4 Control Panel
4-4.1 . Set time: in the case of standby press the "+" key (" + "key lights), enter the
time setting, in set mode according to the local clearing key or recharge key, switch
around four Numbers and the week, press the" + "key or" - "button to adjust number
or a week, Press the "auto" button to confirm the current Settings and make sure
after the completion of the machine into standby mode, the button lights on.
4-4.2 . According to the local clearing, machine start cleaning within a certain scope.
4-4.3 . According to the automatic
cleaning, automatic cleaning the key
under the light machine start,
according to the actual terrain as intelligent switch cleaning mode, such as
bow type cleaning, spiral, along the wall cleaning, around the pillar.
4-4.4. The automatic recharge: when press the "recharge" back to the key under
the light, machine into looking for automatically recharge mode, find
back filling machine entered the stage of charging, increasing power indicator
light cycle, said in charge. After a full charge into standby mode automatically.
4-4.5. Set the reservation methods: under the condition of standby press
"-" button to enter setup time mode, press "local" cleaning or "recharge" key
switch around four Numbers (press the "+" or "-" key to change the time
or weeks), adjust good reservation time and after one week According to "
automatic" confirm Settings, and then the machine into standby mode, key
light full on. To make an appointment time to, machine immediately activate
automatic cleaning function. (such as: set up the appointments until ten o 'clock,
selected week 1 and press automatic cleaning, then choose 2 weeks according
to the automatic cleaning, then automatic cleaning out and save the reservation
mode, every week 1, week 2 of the 10 o 'clock sweeping machine automatic cleaning
the room.) Note: this working mode must be equipped with recharge, just can use.
4-4.6. Border cleaning: standby, please press
" "
and" - "key at the same time, the
machine into border cleaning mode. If you need to other models,
please press the other relevant key and exit border cleaning mode.
5. Charging base
5-1. The structure, as shown in figure (11).
Spot cleaning
Setup button1
Auto cleaning
Auto recharge
Setup button2
Adapter socket
Charging contact sheet
Indicator Light
Figure (11)
Figure (10)
