background image

Safety Information

To assure the correct use of this device, the following basic safety measures should always be followed including the 
warnings and cautions listed in this instruction manual.

Contact your doctor and obtain all information about your blood pressure.
Self-diagnosis and self-treatment based on the measurements obtained using this device may be dangerous.
Always follow the instructions of your physician or licensed healthcare provider.
Patients with chronic conditions or blood circulation obstacle issues should use this device under the guidance of 
a medical doctor.
This device is intended for the use of adults to measure their blood pressure and pulse rate. Do not use this device 
on infants and on people who have difficulty in expressing their intentions.
DO NOT adjust medication based on measurement results from this blood pressure monitor. Take medication as 
prescribed by your physician. Only a physician is qualified to diagnose and treat High Blood Pressure.
The monitor is not intended to be a diagnostic device.
Control the pressure of the device within 300m mmHg (40kPa) to avoid congestion or numbness in the arm.
This device is only for use on human body for measuring Blood Pressure.
Always use the special cuff provided with the device in order to obtain accurate measurement.
Do not use a mobile / cell phone near this device.
Do not dismantle or repair the device or the cuff. there is no user serviceable parts in it.
Use only 1.5 V (Volt) alkaline batteries for this device. Using other type of batteries may damage the unit.
Ensure the batteries are inserted in to the battery compartment with the correct polarity.
If battery fluid gets in to your eyes, rinse with plenty of water and contact a physician immediately.
When the  ‘Low battery’ indicator appear on the screen, replace all 4 batteries after turning off the device.
If the device is being used after more than 3 months of inactivity, please replace the batteries.
Dispose batteries and the device with all accessories in accordance with the prevailing laws and regulation of your 
City/county/State

What’s in the Box

The box should have the following items:

Main body - The Blood Pressure Monitor

Cuff and cuff tube

Batteries (4xAA Alkaline batteries)

Instruction Manual

Warranty card

1.

2.

3.

4.

5.

1.

2.

3.

Battery Installation

Turn around the main body, press on the cover 

of the  battery compartment and slide it down.

Install the four ‘AA’ Batteries by matching the 

polarities: + (positive) and - (Negative) as 

marked in the battery compartment.

Slide in the battery compartment cover back.

When replacing batteries in the future, ensure that the Blood Pressure Monitor is turned off.  When the battery is 

low,  This icon                 will appear and start flashing. At this time please replace all 4 batteries. The time and date 

need to be reset every time the batteries are replaced. However, the stored data will not be eliminated.

1

2

3

Please follow the directions mentioned below:

3

Summary of Contents for EOC -SBPBT-L











Reviews: