4) Assembly:
INSTALLATION GUIDE
FIGURE 4.1.1
Work-surface preparation
Place both work-surface pieces (AML-1354-xx
and AML-1355-xx) down on a padded
workbench or similar non-marring surface.
FIGURE 4.2.2
Top view of work surface and bolted frame
shown.
Bolted Frame Attachment
Figure 4.2.1
Bolted frame attachment
Line up the predrills of the work-surface back
piece (AML-1354-xx) to the through holes of
the Bolted Frame Assembly (AMM-3030-xx).
Attach the Bolted Frame Assembly (AMM-
3030-xx) to the work-surface (AML-1354-xx)
using (6) #10 x 2.25” wood screws.
FIGURE 4.2.3
Detailed view of figure 4.2.2 shown.
After AMM-3030-xx is attached, confirm that
the product matches the picture shown in
Figure 4.2.3.
