www.enware.com.au
Call 1300 369 273
3
Working Pressure Range
50-800 kPa
Recommended Maximum Pressure
500 kPa*
Working Temperature Range
5 °C – 85 °C *
compliance
*Enware products are to be installed in
accordance with the Plumbing Code of Australia
and AS/NZS3500.
Reference should also be made to the Australasian
Health Facility Guidelines (AHFG), ABCB and Local
Government regulations when considering the
choice of, and the installation of these products.
Thermostatic Mixing Valves and Pressure
Reduction Valves may be required to comply
with maximum temperature and pressure
requirements.
please note
Enware Australia advises due to ongoing Research
and Development, specifications may change
without notice.
Component specifications may change on some
export models.
before installation
Before Proceeding With Installation
• Ensure all operating & dimensional
specifications are suitable for the intended
installation.
• Ensure all supply lines are flushed thoroughly
to remove debris prior to the installation of
this product as per AS/NZS 3500.1. Strainers
(40 mesh) are recommended if debris is an
ongoing problem.
WELLBEING SERIES
Installation & Maintenance Instructions
technical data
For use with potable water only.
Summary of Contents for WELLBEING Series
