enware TWYFORD Series, Installation And Maintenance Instructions Manual

Page: 5 / 8

www.enware.com.au Call 1300 369 273 5
Floor Mounting
Determine floor fixing requirements.
Floor fixing kit (including brackets and screws) is
supplied. Ensure the pan bracket screws can be
fixed onto floor material with adequate structural
integrity and strength.
Mark out the drill holes for fixing brackets. Pre-drill
holes and install fixing brackets, then fix the toilet pan
in place. Hand tighten the pan fixing screws, but do
not over-tighten. (Over-tightening screws will cause
the ceramic to crack.)
Install white screw cover caps (supplied).
Caulking
Connect flush pipe and waste to the pan, and visually inspect the pan for any leaks.
Level the pan, and ensure the floor surface is clean and dry - free of dust, moisture and
grease.
Apply silicone sealant to the bottom contact surface of the pan and around the perimeter
of the foot of the pan to create a thorough seal between the pan and floor.
For pan infills, apply silicone sealant to all contact surfaces to the pan, to the wall, and to
the floor. Ensure no gap is left that can let any moisture to get through inside.