www.enware.com.au
Call 1300 369 27 19
The first page shows details about the sensor.
For explanation on the information listed, see the explanation page
(press the button on the App).
HOW TO CHANGE THE SENSOR PROGRAM SETTINGS
1. To access the sensor function program, press the settings
button .
2. Enter the password. (Contact Enware for default password,
or your selected password if already registered).
3. Change the settings as desired.
Once the settings are set in the App, send the settings to the
sensor tap. (Press the "Send settings to product" button.)
4. Activate the sensor tap several times
for the new settings to come into
effect.
For explanation on the program settings
listed, see the explanation page (press
the button on the App), or refer to
next page.
To access Command Buttons and Sensor Program Settings,
contact Enware Technical Services on
1300 369 273
, or email
, for access password.
COMMAND BUTTONS
Use the command buttons to open or close the tap using the App,
or activate Cleaning Mode (turns off the sensor for a set period of
time to allow for cleaning, indicated by green pulsing light indicator
on sensor). Report function sends the sensor information to your
email.
