EnwaMatic® Bespoke BS 300
Maintenance & Troubleshooting
On site maintenance:
There is no on-site maintenance requirement.
It is recommended only that routine checks are made when visiting the plantroom:
•
Visible flow: Position 7-8 on the sight flow indicator.
•
Green light on control panel. PLC HMI display ‘On’, status ‘Run’.
Any problems should be reported to ENWA.
Warranty / Maintenance Agreement:
The standard warranty on all equipment supplied is 2 years from delivery:
The unit will operate under the additional water treatment warranty for 15 months post
commissioning.
Any problems should be reported directly to ENWA, who will advise or attend as required.
After this time, regular annual servicing by ENWA should be carried out to check all components,
clean the filter media, top up reaction media and analyse system water. This service extends the
warranty on the water treatment process for additional 12 month periods. Any problems arising
during these periods should again be reported to ENWA.
Spares:
There is no requirement to hold spares on site.
Side stream filtration / water treatment provides long term management of water quality. Units do
not need to operate continuously and can remain isolated for extended periods once established.
ENWA hold most components in stock for immediate dispatch. Grundfos pumps have a lead time
of 2 weeks.
13
