Envivio 4Sight, Administrator'S Manual

Page: 86 / 116

88
Thinning parameters
The following preferences configure the server thinning algorithm. They
are all in milliseconds
.
bind_ip_addr This tells the server what IP address(es) it
should accept client connections on.
A value of 0 means all IP addresses currently
enabled for the machine.
rtp_timeout Amount of time in seconds the server will
wait before disconnecting idle RTP clients.
This timer is reset each time the server
receives an RTCP status packet from the
client.
maximum_bandwidth Maximum amount of bandwidth (in kbps)
the server is allowed to serve.
If this limit is exceeded, new client requests
for additional streams will receive the RTSP
error 453, "Not Enough Bandwidth"
maximum_connections
Maximum number of concurrent
connections allowed by the server.
real_rtsp_timeout rtsp_timeout is the time-out that gets
reported to the client.
This is the actual time-out value.
rtsp_timeout Amount of time in seconds the server will
wait before disconnecting idle RTSP clients.
This timer is reset each time the server
receives a new RTSP request from the client.
Keyword Value
drop_all_packets_delay If a packet is only sent this far ahead of when
the client needs to play it, it is dropped
drop_all_video_delay If a video packet passes this delay, it is dropped.