Envivio 4Sight Administrator'S Manual Download Page 102

Page: 102 / 116

104

Table 1. WebAdmin streamingadminserver.conf parameters

Keyword

Value

port

The port on which WebAdmin listens for requests.

root

The root directory for all the HTML and CGI files. This path should be
absolute.

plroot

The root directory for playlists managed by 4Sight. The path should
be absolute.

host

The host name of 4Sight.

qtssIPAddress

The IP addr

ess

of 4Sight to administrate.

qtssPort

The port of 4Sight to administrate.

qtssName

The name of 4Sight executable.

realm

The authorization realm for 4Sight.

log

Enable logging (1) or disable logging (0) for 4Sight.

Logfile

The full path of the WebAdmin log file.

logtime

Number of hours before which logs are rolled.

allow

Allow the following IP to access the server (optional).

deny

Deny access to the following IP (optional).

Summary of Contents for 4Sight





















































































































Search results

Summary of Contents for 4Sight

Reviews:

Related manuals for 4Sight

Brands by name

Popular brands

Envivio 4Sight, Administrator'S Manual

Search results

Summary of Contents for 4Sight

Reviews:

Related manuals for 4Sight

Brands by name

Popular brands