II
Safety Recommendations | Bellwin
Important safety instructions
1.
Please follow up the user guidelines and entire warning instruction and,
retain them for future reference.
2.
Please follow the law, safety regulation, breaker bias and the information of
rating babel to setup the overload alarm threshold.
3.
Please connect the device to a ground socket or system.
4.
Please make sure the total amps of outlet are not overload to the
equipment rating label, which is normally located close to the power inlet
connector(s).
5.
It would cause the danger of exploration if replace wrong type of batteries.
6.
The measurement will be inaccurate when the battery is unstable.
7. Do not install the device near water or humid air. To prevent the risk of fire
or electric shock, please do not expose the device in water or humid air.
8. You may clean the device only with dry mop.
9. Use only attachments or accessories specified by the manufacturer
10. Only appropriately qualified and skilled personnel should attempt to install,
operate, maintain, and service this product. It should be returned back
immediately when it is harm or broken as below:
- When the plug or socket is broken.
- Spurted by liquid or objects go into the device.
- The device had exposed to water or humid air and cannot operate, or
dropped down.
Do not install the PDU by yourself. Open the device may let you expose
in the dander of high hazardous voltages or anything else. Please ask
your distributor for reference information.
11. Do not let object or liquid go into the device. If it does not, it may reduce
the risk of causing fire or electric shot.
12. Please see the symbols with in the documentation or on the appliance.
13. Only qualified service personnel should install and access the PDU.