AFTER INSTALLING THIS UNIT PLEASE PASS ONTO END USER
DO NOT THROW AWAY
14
Detachable coupler
Detachable coupler
The Slimline 150 must always be fitted with a
condensate discharge. The condensate must
be discharged through a drainpipe.
EnviroVent
recommend using
KITCONDENSATE-BK.
The condensate discharge connection
with 3/4” mail thread (not supplied with
the appliance) must be screwed into the
appliance’s condensate bin by the installer.
Important:
Always install a detachable coupler
in the condensate discharge line as
closely as possible to the appliance,
otherwise the condensate bin cannot
be removed from the appliance for
service purposes.
The condensate discharge line can be mounted
to it, preferably glued, if necessary using a square
bend. The installer can glue the condensate
discharge to the appliance in the desired
position. The drain must discharge under the
water level in the U-trap. Use a condensate
discharge line with a diameter of 32 mm.
Particularly for ceiling mounting, make sure
the condensate discharge is below the level
of the condensate bin in the Slimline 150.
Before connecting the condensate discharge
to the appliance, pour water into the U-trap to
create an air trap.
Note:
Add a teaspoon of oil to prevent drying
out. Alternatively use a non return valve in
place of the U-trap.
04
Installation Instructions
Recommended
(KITCONDENSATE-BK)
