AFTER INSTALLATION THE END USER SHOULD
KEEP THIS GUIDE FOR FUTURE REFERENCE
DO NOT
THROW AWAY
2
Wiring Regulations
All wiring must comply with Building Regulations and the current
IET Wiring Regulations (BS7671 in the UK) or equivalent standards
for other countries. The final installation should be examined and
tested by a qualified electrician.
Electrical Connection
The unit requires a continuous electrical power supply through a
residual current device (RCD) having a rated residual operating current
not exceeding 30mA. Connection to the fixed wiring must be made
outside the unit in a suitable location. The unit must be earthed and
a double pole switch with a minimum contact separation of 3.0mm
must be used to provide insulation for the unit. The unit must be
able to be disconnected from the mains supply after installation.
When wiring the unit, the included unswitched fuse spur should be
incorporated in the fixed wiring.
The power supply cable running into the unit must remain the
supplied flexible cable (not a solid core lighting cable). If the power
supply cable becomes damaged, it must be replaced by EnviroVent,
an authorised service agent for your region/country, or a similarly
qualified person in order to avoid a hazard. Do not remove or tamper
with any electronic components inside the product.
Users
The unit is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience
and knowledge, unless they have been given supervision and usage
instruction by a person responsible for their safety. Children should
be supervised to ensure they do not play with the unit. Cleaning and
user maintenance must not be performed by children.
