background image

Cyclone 7

01423 859 395

SHOULD YOU ENCOUNTER ANY PROBLEMS 

INSTALLING THIS UNIT, CALL US ON:

About the Product
Function

The EnviroVent Cyclone 7 has been developed to improve indoor 

air quality, reduce humidity levels in kitchens and bathrooms and 

resolve condensation and mould problems. It is designed to operate 

continuously for up to 7 years without a major service.

Humidity Tracking

As standard, the unit is fitted with Intellitrac

®

 Technology to sense the 

relative humidity in the room (not included on 2-speed variant). Once 

above the setpoint, the fan speed will increase as humidity levels rise 

and decrease as humidity levels fall. This intelligent function reduces 

energy costs, motor wear, and ensures a long life for the product.

Pullcord

If your Cyclone 7 fan includes a pullcord, it can be used to engage the 

maximum extraction rate for odour control. Pull down on the cord to 

increase the unit to the maximum extraction rate. Pull down again to 

decrease the unit back to the low extraction rate. 

Cartridge Replacement

If necessary, the central cartridge can be exchanged for a replacement. 

The removed cartridge can be returned to EnviroVent for recycling. 

This allows the front cover, rear carcass and duct to remain intact 

throughout the life of the property, eliminating the wasteful disposal 

of non-biodegradable material to landfill sites.

Summary of Contents for CYCLONE 7 230V Series

















Reviews: