17
To remove pump, push end cap firmly into probe to loosen the locking buttons. While pushing
end cap in, press locking buttons into probe.
Releasing First Lock Button
Releasing Second Lock
Button
Removing End Cap
The Pump is removed from the Probe using a Pump Removal Tool supplied with the system.
One end has two pins which are used to spin the filter & filter top off. The second end has a
threaded hole, which is screwed onto the inlet end of the Pump. The Pump then is pushed out
of the Probe.
Pump Removal/Insertion Tool
Threaded Hole
Filter Adapter Pins
Remove the Pump
Envirotecnics
Tel: +34 872 080 542
envirotecnics@envirote
cnics.com
www.envirotecnics.com
