2
If you don’t read this service guide at least read these 7 simple steps
SIMPLe STePS FOR A CORReCT INSTALLATION AND A HAPPY CUSTOMeR
1.
set up system and install it on the main water supply coming into
the home
Page 6-7
2.
set up a bypass (see illustration ) and use corrugated
flexible stainless or some other flexible piping to make the
plumbing connections
Page 7-9
3.
Install a proper drain line with an air gap
Page 10
4.
Plug in the system into a standard outlet and set the time of day
Page 11
5.
Open valve on the incoming line slowly to fill the tank and begin
the start up procedure. Keep bypass and outgoing valve closed
Page 12
6.
Allow system to start itself up and self clean the filtration media
Page 13
7.
Open valve on the outgoing line (keep bypass closed) and put
system in service position and flush water throughout the house,
flush toilets, run tubs, replace ice and drain water heater if need
-
ed.
Page 14
5.
7.
2.
3.
please see the great information available in this service manual
Avoid Problems and Callbacks
Create Happy Customers
valve
open
valve
open
valve
closed
inlet
to valve
outlet
from valve
in raw
water supply
out filtered
to home
bypass
closed
valve
closed
valve
open
valve
closed
out filtered
to home
in raw
water supply
bypass
closed
inlet
to valve
outlet
from valve
out filtered
to home
in raw
water supply
bypass
closed
inlet
to valve
outlet
from valve
service
Position
Summary of Contents for CWL-1354-1.5
Page 18: ...18...
