Secondary Installation
Figure 55. Ceramic Line Put in Place.
3. Tilt the top of the liner slightly forward and slide one
side of the liner into the firebox (see Figure 54 & 55).
Ensure that the liner goes behind the pilot assembly as
it is rotated into the firebox. It will be a snug fit. The
bottom of the liner must rest on ceramic liner support
installed in step 2.
Figure 54. Slid In the Ceramic Liner.
34
4. Once the liner is in the firebox adjust it so it is flush with the front of the firebox, and so that there is
some clearance behind the pilot.
I
NSTALLATION
OF
T
HE
F
ASCIA
:
1. Ensure the lip with the tabs on the fascia is resting on top of the one on the Retreat (see Figure 56).
2. Slide the two (2) mounting slots at the bottom of the
fascia onto the studs on the Retreat (see Figure 56 &
57).
3. Tighten a wingnut on the stud to secure the Chalet to
the fascia.
Fascia
Wingnut
Control
Panel
Stud
Figure 57: Fastening Bottom of Chalet.
Figure 56: Installing Chalet onto The Retreat.
Note: To remove
fascia
reverse the
above steps.
