11
Maintenance And Service
c
Leaning
D
ecoRative
s
uRfaces
:
Painted and porcelain faces should be wiped with a damp cloth periodically. If a plated face has been
purchased, it should be unpacked/unwrapped carefully to avoid getting anything on the surface of the
finish, including cleaners, polish and finger prints. It is important to note that fingerprints and other
marks can leave a permanent stain on plated finishes.
To avoid this, give the face a quick wipe with
denatured alcohol on a soft cloth BEFORE lighting the fireplace.
Never clean the face when it is
hot. Do not use other cleaners as they may leave a residue, which can become permanently etched into
the surface.
g
Lass
D
ooR
R
emovaL
:
In order to install the glass media,
and for regular cleaning, the glass
door must be removed. There are
two (2) door latch mechanisms
on top the glass door as shown
in Figure 8. Each latch has a hole
at the front to use the door tool,
supplied with the unit, to pull the
mechanisms straight out and up.
When the top latches are unhooked,
lean the door forward and then lift
it up out of the alignment slots at
the bottom corners of the firebox,
shown in Figure 9.
To replace the glass door, simply
reverse the above procedure.
Warning:
Do not touch or attempt
to remove the glass door if the
fireplace is not completely cold.
WARNING: Never operate the
fireplace with the glass door
removed.
Figure 8. Top latches for glass door
Figure 9. Bottom Alignment Slots for glass door.
Door Latch Mechanism
Door Tool Hole
Alignment Slot
(both corners)
*Parts removed
for clarity*
